In addition to standard tooling, we can manufacture 1 off specials with any cutting diameter, cutting width, number of teeth or bore diameter for either mechanical or manual feed machines.

Manual feed tooling is manufactured to current PUWER 98 regulations. To view these regulations you will need Adobe Acrobat reader.

Get Acrobat Reader

Polycrystalline Diamond tipped tools give a significant increase in tool life compared to Tungsten Carbide tooling.

Application

For jointing of laminated panel materials

for particle board and MDF panels, raw, melamine and paper laminated,

HPL and foil laminated/veneered panels

application against feed on double-end tenoners and edge trimming machines

• PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime.
  
• High wear resistance
  
• Tool allows for 3 adjustments = four single tool lives between sharpening, by removal of shims
  
• Large resharpenable area for maximum tool life
  
• Opposing shear angle for high quality cut